123 HP Officejet Pro 8610

123 HP Ojpro8610

  • HP Officejet Pro 8610 Support
  • HP Officejet Pro 8610 Airprint Setup
  • 123 hp Officejet Pro 8610 Setup
  • HP Officejet Pro 8610 windows 10
  • HP Officejet Pro 8610 Wireless Setup
  • HP ePrint Officejet Pro 8610 Installation
  • HP Officejet Pro 8610 driver Software
  • HP Officejet Pro 8610 printer driver download
  • Install hp 8610 printer without disk
  • 123 hp Officejet Pro 8610 Troubleshooting
  • HP Officejet Pro 8610 iPhone driver
123.hp.com/ojpro8610

123 HP Printer Technical Support Toll Free

Call Now – 1 800 806 4515

123-hp-support-call

HP Officejet Pro 8610 (ojpro8610) is a full featured all-in-one printer delivers professional-quality color for up to 50% lower costs per page than lasers. Stays productive and tackle high-volume jobs with print, fax, scan, and copy versatility. OfficeJet Pro 8610 is loaded with all latest features like automatic document feeder (ADF), Preloaded business apps, Scan, Fax, Airprint, two sided (Duplex printing) and also deliver protection to access to the confidential print jobs through HP JetAdvantage Private Print which making it popular among all the printer models specially designed for official usage.

123 HP Officejet Pro 8610 Setup

Step 1: Unpack the printer (ojpro8610) from the box and remove all tape, stickers, and packing materials from the printer and control panel display. Place your fingers into the slot on the left side of the printer, and then pull to open the ink cartridge access door and then remove all tape and packing material from inside the printer and close it. Similarly, open the input tray door, pull it toward you to extend the paper tray, and then remove the packing tape and push it back.

Step 2: After you have unpacked and removed tapes, find the duplexer in the box. Hold the duplexer by its sides with the rollers toward the printer, insert it into the slot in the rear of the printer, and then push the duplexer into the printer until it snaps into place.

Step 3: Remove paper tray setup from the packed box and remove all tapes and packaging material from it. Now, place it on a flat area and position your printer above it.

Step 4: Connect the power cord to the rear of the printer, and then plug the other end of the power cord into an electrical outlet/socket.

Step 5: Switch on the printer, and set your preferences on the printer control panel, touch your preferred language and country/region, and then touch yes to confirm your choice. Also, select the date and time, and then touch Yes to confirm your choice.

Step 6: Open the input tray door, and then pull it toward you to extend the paper tray. Slide the A4 size paper width guides to their outermost position with short edge forward and the print side downward direction and push it back. You can optionally add papers in tray 2 (Which we placed underneath the printer)

Step 7: Uplift the cartridge access door until it locks into place. Remove one of the ink cartridges from its package which comes usually with the printer and be careful to only touch the black plastic on the ink cartridge. Now, remove the plastic tape from the ink cartridge.

Note: Do not touch the copper-colored contacts or the ink nozzles. Do not replace the protective tape on the contacts. Handling these parts can result in clogs, ink failure, and bad electrical connections.

  • Lift up the cover on the cartridge slot and hold the ink cartridge by its sides with the nozzles towards the printer, and then press the ink cartridge forward into the slot until it fix back into place. Now, close the ink cartridge slot and repeat the previous steps to install the other ink cartridge. Close the lid.
  • The printer automatically prints an alignment page after the installation of the ink cartridges whenever new cartridges are installed.
  • Start the ink alignment process by following the guidance mentioned on the page. Lift the scanner lid and place the alignment page with the print side down on the scanner glass with guidance engraved on the glass.
  • Close the scanner lid and touch OK on the touch panel.

Step 8: Download the latest compatible software from any genuine website in your device according to your operating version and start printing.

Note: Do not attempt to connect the printer to a computer until instructed to do so in the printing software.

Click here 123.hp.com/ojpro8610, for complete information.

123 HP OJPro 8610 Troubleshooting

How to fix printing issues after upgrading to windows 10?

Note: All software and drivers should be upgraded through HP recommended channels.

Step 1: Confirm all Windows updates are installed and are fully functional.

Software checking procedure

  • Search Windows for change device installation, then click the Change device installation settings control panel setting in the list of results.
  • Select Install updates automatically from the important updates drop-down menu.
  • Search Windows for Windows update, then click the Windows Update control panel setting in the list of results.
  • Click Check for updates.

Step 2: Use HP Print and Scan Doctor to check for printing and firewall issues. It is a free tool, provided by HP that troubleshoots and resolves printing and scanning problems. Download and run it. Now check if you can print.

If the problem still exists, try fixing the firewall issue as below:

  • Click Network, and then click Troubleshoot Firewalls.
  • Click the name of any firewall software on your system that has an Enabled status, then click Disable.

If the above step fails, try the next one.

Step 3: Make sure the Print spooler service is running Check the list of Services running on Windows to make sure the Print Spooler is started.

  • Search Windows for view local services, then click the View local services Control panel setting in the list of results.
  • The Services window opens.
  • Locate Print Spooler in the list.
    • If the status is Stopped, right click Print Spooler, then click Start.
    • If the status is Started, right click Print Spooler, then click Restart.
  • Try to print.

How to fix scan issues after upgrading to windows 10?

Note: All software and drivers should be upgraded through HP recommended channels.

Step 1: Confirm all Windows updates are installed and are fully functional.


Software checking procedure

  • Search Windows for change device installation, and then click the Change device installation settings control panel setting in the list of results.
  • Select Install updates automatically from the Important updates drop-down menu.
  • Search Windows for Windows update, then click the Windows Update control panel setting in the list of results.
  • Click Check for updates.

Step 2: After the Print and Scan Doctor installs and opens, the Welcome screen displays. Click the name of your printer, then click Next.


  • Click Fix Scanning.
  • In the HP Print and Scan Doctor results screen, view the list of actionable results.
  • If you see white checkmarks, the printer passed the tests. Click Test Scan or click Skip.
  • If you see yellow exclamation points, the test failed and required user action, but the step was skipped. Click Test Print or click Skip.
  • If you see a red X, follow the on-screen instructions to resolve the issue.
  • Try to scan.

DISCLAIMER : 123 HP Support is an independent third party website for HP printer support services. We do not have any kind of association with “HP” and its services. All the information and images used in this website are only for the informational purpose. We do not sell HP products or its services in any form. We do not provide any warranty or guarantee for HP printers. You should contact the manufacturer of your Printer (HP) for the same. For more information regarding our Terms and Policies visit 123hp.support.